선박 부품용 블랙 블록의 CNC 부품 서비스 가능 엔지니어
Jun 09, 2014
메시지를 남겨주세요
일반적으로 블랭크의 화학 조성이 단순할수록 단조 후 냉각 속도가 빨라집니다. 그렇지 않으면 더 느립니다. 이에 따르면 단순 탄소강 및 저합금강 실린더 단조품의 경우{0}단조 후 공랭식을 채택합니다. 복잡한 조성의 중합금강 및 고합금강 단조품은 단조 후 피트 냉각 또는 노 냉각을 채택해야 합니다.
Sometimes, during the forging process, the intermediate billet or forging is locally cooled to room temperature, which is called intermediate cooling. For example, in order to perform flaw detection or clean up defects on the blank, intermediate cooling is required. Another example is multi-fire forging, first forging the middle part and then both ends. After the middle part is forged, it should be cooled in the middle, so as not to affect the quality when reheating the two ends. The determination of the intercooling specification is the same as the cooling specification after forging.
zhang@pride-cnc.com으로 문의하세요.
